Dear All,
Alot of people in the field are always asking why the engine inlet fairings differ from engine to another?? Some of them are cones another are half ball??
What does the Swirl White Solid Line Means??
I would like to clarify this issue in a very simple way giving an example of some engine types.
On CFM56-5A/5B/5C, the engine inlet fairing looks like a cone. This cone has a specific sliding angle which is called (Anti Ice Algebric Angle). According to the studies done by the designers, they have noticed that at this specific angle of cone slide the ice will not accumulate or build up on the engine inlet cone which in some cases it may become dangerous on engine operation.
On V2500, although it is a cone, but the cone slide doesn't have Anti Ice Algebric Angle as it is more acute angle. Instead of that angle, the cone head is made of small piece made from rubber. This peice will keep vibrating while engine is running preventing engine inlet ice accumulation or build up mechanically. (REALLY SMART DESIGNERS).
On CF6-8, the engine inlet fairing isn't completely a cone. It is half ball shape and as we know on this shape, it is almost impossible to be the perfect shape for ice accumulation or build up. Now most of the Engine Inlet Fairings have swirl solid white line. This line will become like EAGLE EYE shape when the engine starts to run. This shape can be distiguished clearly by the birds. The EAGLE EYE shape will make birds frightened from coming near the engine while running and this will prevent bird ingestion or what we call (ENGINE BIRD STRIKE).
Please note that in the near future, you will find alot of photos and schematics explaining most of common questions generated by different people in the field and from passengers.
B.Regards
Ayman Shak'ah
Licensed Aircraft Maint. Engineer
Showing posts with label Turbine. Show all posts
Showing posts with label Turbine. Show all posts
Monday, September 17, 2007
Sunday, September 16, 2007
Turbine Inlet Temperature - TIT SENSOR
Turbine Inlet Temperature Sensor (Engine):
The turbine engine is basically composed of different stages of compressors, combustion chamber, turbine stages. Now, when the engine is running, the air will ingested into the engine and will be compressed through the compressor stages. After that the air will enter the combustion chamber as an element for combustion to take place with the fuel. then, the discharged hot exhausted air will leave the combustion chamber under very high in both (Pressure and Temperature). This exhausted air is used to hit the turbine (High Pressure Turbine) causing them to rotate at which in turn will rotate the compressor and so on.
It is used to measure the temperature of the discharged air coming from the combustion chamber and hitting the turbine. the sensing of this temperature is very useful to control the engine operation by the computer that is used this information and according analysis the engine combustion effeciency and at the same time control the power output of the engine automatically through a computer called ECU - Engine Control Unit -. the ECU is a computer that receives different signals from different sensors and systems of the aircraft. One of these inputs is the Turbine Inlet Temperature.
Turbine Inlet Temperature Sensor (Aircondition System):
There is also a sensor called TIT sensor installed on the airconditioning pack. The aircondition system pack. This pack composed of
1- ACM - Air Cycle Machine - (FAN, Compressor, and Turbine)
2- Heat exchangers
3- Condenser
4- Reheater.
Now, the aircondition system is controlled by computer called Pack Controller and another computer called Zone Controller. Now the engine bleed air is delivered to the airconditioning packs to be conditioned both (Temperature and pressure) in the following sequence:
1- the bled air enters the pack via a pack flow valve.
2- the hot bled air enters the primary heat exchanger to be cooled little bit before entering the ACM compressor at which the air is going to be compressed so its pressure will increase.
3- the air will leave the compressor with high pressure and very high temperature due to the compression.
4- then the air will enter the main heat exchanger to be cooled. Then the air will enter the reheater to increase its temperature so we can eliminate any water particle suspended in the air before entering the turbine - The elimination of any water particle is useful to protect the turbine blades from being daamaged or corroded-. Then the turbine will cause the compressed air to extract due to giving force for the turbine to rotate. At this point the air entering the turbine will be so hot and the air leaving is so cold.
Now the computer controlling the system operation needs input to control the flow rate of air entering the packs and also to control the air entering the heat exchangers. Also the computer needs these inputs for maintenance personal analysis and to monitor the efficiency of packs.
Turbine inlet temperature sensed will be signaled to the pack controller which in turn with another sensors signals will control the aircondition system operation.
Ayman Shak'ah
Licensed Aircraft Engineer
The turbine engine is basically composed of different stages of compressors, combustion chamber, turbine stages. Now, when the engine is running, the air will ingested into the engine and will be compressed through the compressor stages. After that the air will enter the combustion chamber as an element for combustion to take place with the fuel. then, the discharged hot exhausted air will leave the combustion chamber under very high in both (Pressure and Temperature). This exhausted air is used to hit the turbine (High Pressure Turbine) causing them to rotate at which in turn will rotate the compressor and so on.
It is used to measure the temperature of the discharged air coming from the combustion chamber and hitting the turbine. the sensing of this temperature is very useful to control the engine operation by the computer that is used this information and according analysis the engine combustion effeciency and at the same time control the power output of the engine automatically through a computer called ECU - Engine Control Unit -. the ECU is a computer that receives different signals from different sensors and systems of the aircraft. One of these inputs is the Turbine Inlet Temperature.
Turbine Inlet Temperature Sensor (Aircondition System):
There is also a sensor called TIT sensor installed on the airconditioning pack. The aircondition system pack. This pack composed of
1- ACM - Air Cycle Machine - (FAN, Compressor, and Turbine)
2- Heat exchangers
3- Condenser
4- Reheater.
Now, the aircondition system is controlled by computer called Pack Controller and another computer called Zone Controller. Now the engine bleed air is delivered to the airconditioning packs to be conditioned both (Temperature and pressure) in the following sequence:
1- the bled air enters the pack via a pack flow valve.
2- the hot bled air enters the primary heat exchanger to be cooled little bit before entering the ACM compressor at which the air is going to be compressed so its pressure will increase.
3- the air will leave the compressor with high pressure and very high temperature due to the compression.
4- then the air will enter the main heat exchanger to be cooled. Then the air will enter the reheater to increase its temperature so we can eliminate any water particle suspended in the air before entering the turbine - The elimination of any water particle is useful to protect the turbine blades from being daamaged or corroded-. Then the turbine will cause the compressed air to extract due to giving force for the turbine to rotate. At this point the air entering the turbine will be so hot and the air leaving is so cold.
Now the computer controlling the system operation needs input to control the flow rate of air entering the packs and also to control the air entering the heat exchangers. Also the computer needs these inputs for maintenance personal analysis and to monitor the efficiency of packs.
Turbine inlet temperature sensed will be signaled to the pack controller which in turn with another sensors signals will control the aircondition system operation.
Ayman Shak'ah
Licensed Aircraft Engineer
Subscribe to:
Posts (Atom)
